Offset Axle Panhard Bracket 1/4″

Description

This is our idea of the correct way to make an Offset Panhard / Trackbar bracket, it seems like 3 out of 4 need to be on the leading edge of the axle for clearance issues.The center of the heim will be 5-5/8, 6-5/8 or 7-5/8 inches vertically from the center of the axle tube and 3.5″ forward of the center of the axle tube.They are cut to fit a 3″ axle tube so they can be modified to fit any tube diameter, fabricated from 1/4″ plate, and bent perfectly so you don’t have to play with the grinder to make them fit! They have two drain holes built in.These are setup for a 2″ ID and have 5/8 inch bolt holes so just about any heim will fit with minimal misalignment.